SAAB WIS ONLINE

Front bumper

Front bumper

To remove


1. Remove the grille.


2. Remove the direction indicators.

3. Remove the headlamp wiper arms.

4. Unscrew the four screws (2 by the direction indicators and 2 on the bumper member by the horn) holding the bumper to the bumper member.


5. Remove the nuts holding the bumper to the front wing.

6. Unscrew the four screws holding the bumper to the wing liner.


7. Remove the spoiler shield.


8. Unplug the connectors to the fog lights.

9. Unplug the connectors for the temperature sensor.

10. First loosen the outer corners on each side so that they are free from the wing and wing liner.


11. Pull the bumper forwards.

Note

When changing the bumper, the spoiler and number plate must be transferred to the new bumper.



To fit



1. Make sure the metal tabs (9 pcs) are not damaged or bent.

2. Lift up the bumper and press it onto the bumper member. Make sure the wiper blade stop and the wiper motor shaft are positioned correctly.

3. Fit the steel bumper reinforcement so that it is located between the wing and the wing liner.


4. Then fit the bumper shell over the wing liner and screw it on.

5. Screw on the nuts in the front wing.


6. Screw the bumper shell to the bumper member (4 screws).

7. Screw on the wing liner.


8. Plug in the connector to the temperature sensor.

9. Plug in the connector to the fog lights.

10. Fit the spoiler shield.


11. Fit the direction indicators. Make sure the plastic guides are located correctly in the headlamps.


12. Fit the headlamp wiper arms.

13. Refit the front grille.

14. Check the function of the headlamp wipers.