Lower protective moulding, front and rear doors

/ 9-5 (9600) / 1998 / 8. Body / Exterior / Adjustment/replacement / Lower protective moulding, front and rear doors

To remove

1.	Loosen the clips securing the moulding to the door.

2.	Lift off the moulding.

To fit

1.	One of the holes is used as a guide. See illustration (step 1).

2.	Press on the moulding.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.