SAAB WIS ONLINE

Rear bumper

Rear bumper

To remove


1. Undo the screws in the wheel housing, 2 on each side.


2. Open the boot lid.

3. Fold away the luggage compartment carpet and remove the seals.


4. Undo the nuts securing the bumper. The lower bolts have nuts if the car is fitted with a trailer hitch.

5. Together with an assistant, pull out the bumper from the edges of the wheel housings and lift the bumper backwards.

Important

Be careful to avoid damaging the paintwork.



To fit



1. Place the bumper in position and press it over the edges of the wheel housings. Make sure it is in the correct position along the guides in the rear wings.

2. Screw on the nuts by hand.

3. Position the bumper correctly and tighten the screws in the edges of the wheel housings.


4. Tighten the retaining nuts.

5. Refit the seals and fold back the luggage compartment carpet.

6. Close the boot lid and check the fit.