SAAB WIS ONLINE

Rear belts

Rear belts

To remove



1. Remove the C-pillar trim (fastened with clips).

2. Undo the bottom seat-belt mounting and remove the belt guide form the C-pillar trim.

Draw the belt through the C-pillar trim.

3. Remove the upper belt mounting from the C-pillar, 2 nuts.


To fit

Important

Ensure that the belt runs correctly.

Check that the door seals fit correctly.


Fit in reverse order.

Tightening torques:

Inertia reel mounting nuts 45 Nm (33 lbf ft).

Floor mounting 45 Nm (33 lbf ft).