Rear centre belt
Rear centre belt |
1. |
Fold down the backrest.
|
2. |
Remove the head restraint from the seat.
|
3. |
Remove the speaker grilles on both sides.
|
4. |
Remove the clips at the front of the parcel shelf, 3 x.
|
5. |
Lift out the parcel shelf trim and pull out the centre belt.
|
6. |
Unscrew the lower belt fixing, 1 nut.
|
7. |
Remove the centre belt from the parcel shelf, 1 nut.
|
To fit |
Important | ||
Ensure that the belt runs correctly. |
||
Fit in reverse order.
Check that the centre belt runs in front of the locating pin and backrest.
Tightening torques:
Inertia reel mounting nuts 45 Nm (33 lbf ft).
Floor mounting 45 Nm (33 lbf ft)