SAAB WIS ONLINE

Sunroof assembly

Sunroof assembly

To remove

It is recommended that 2 people carry out steps 5 and 6.


1. Remove the headlining. See group 8 Interior equipment, Adjustment and replacement, “Headlining”.

2. Remove the front interior lighting roof console. Unplug the connector for the sunroof motor and let the console hang on the wiring harness.

3. Detach the four drain hoses from the nipples on the sunroof unit.


4. Unscrew the unit, leaving one screw remaining in the front edge and one in each corner of the rear edge.

5. Together with an assistant, undo the three remaining screws and lower the unit.

6. Lift out the unit from the car.


To fit

It is recommended that 2 people carry out steps 1 and 2.


1. With an assistant, lift the unit into position. Make sure the unit's guide pins are located correctly. (2 people)


2. Fit the unit with one screw in the front edge and one in each corner of the rear edge. (2 people)

3. Fit the remaining screws holding the sunroof unit.

4. Attach the four drain hoses to their nipples.

5. Plug in the connector to the sunroof motor and fit the inner lighting roof console.

6. Check the function.

7. Fit the headlining.