020

Symptom: Parking heater fails to start.

020

Fault symptom

Parking heater fails to start.

Condition

Parking heater activated.

Diagnostic help

Parking heater can be activated with Tech 2.

Parking heater function can be programmed in SID.

Eberspächer diagnostics instrument used for diagnosis.

Diagnostic procedure

1. Check glow plug

•	Lower the heater to gain access to the control module.

•	Remove the parking heater control module.

•	Unplug connector B2.

•	Take a resistance reading across pins 5 and 6 in female connector B2.

•	The reading obtained should be 0.8-0.9 ohms.

Test results OK?

YES

-	Go to point 3.

NO

-	Go to point 2.

2. Check the glow plug leads

•	Check for an open circuit in the leads between the glow plug and pins 5 and 6 in connector B2.

Open circuit found?

YES

-	Repair or replace the faulty lead.

-	Go to point 3.

NO

-	Change the glow plug.

-	Go to point 3.

2. Final check

•	Clear the diagnostic trouble codes in all systems.

•	Contact SID.

•	Activate parking heater (ON).

•	Perform a functionality check.

•	Evaluate the functionality check.

•	Check that the diagnostic trouble code has not recurred.

Test results OK?

YES

-	Fault rectified successfully.

NO

-	See ’Before changing a control module’.