Engine mounting, right
Engine mounting, right |
1. |
Cover the wings and remove the top engine cover.
|
2. |
Fit lifting beam 83 94 850 and take up the weight of the engine via the lifting eye.
|
3. |
Detach the power steering hose from the clip under the engine mounting.
|
4. |
Remove the engine mounting.
|
5. |
Remove the engine pad.
|
To fit
1. |
Fit the engine pad.
Tightening torque: 47 Nm (35 lbf ft). |
2. |
Secure the power steering hose with the clip
|
3. |
Tighten the bolts and nuts on the engine mounting to torque
Tightening torque 47 Nm (36 lbf ft). |
4. |
Lower the engine and remove the lifting beam
|
5. |
Move the engine sideways until it is balanced.
|
6. |
Tighten the engine mounting nuts.
Tightening torque 105 Nm (78 lbf ft) |