Oil filter adapter housing
|
|
Oil filter adapter housing
|
To remove
|
1.
|
Raise the car, remove the cover and detach the oil filter.
|
|
2.
|
Detach the oil hoses from the adapter housing and disconnect the turbocharger's oil pipe.
|
|
3.
|
Remove the adapter housing.
|
To fit
|
1.
|
Clean and inspect the sealing surfaces.
|
|
3.
|
Lubricate the seal and fit the adapter housing to the engine block, using Loctite 518.
|
|
4.
|
Connect the oil hoses and the turbocharger pipe.
|
|
5.
|
Check that the oil plug is properly tightened, fit the oil filter and cover and lower the car.
|
|
6.
|
Fill up with motor oil, warm up the engine and check for leaks.
|
