EVAP shut-off valve hose
EVAP shut-off valve hose |
To remove |
1. |
Remove the vent device, see
.
|
2. |
Remove the shut-off valve and its hose clip from the hose.
|
3. |
Hold onto the cables to prevent them coming away with the hose and pull out the hose.
|
4. |
Remove the quick-release coupling and the hose clip.
|
To fit |
1. |
Apply a thin layer of acid-free Vaseline to the end of the hose.
|
2. |
Insert the hose through the vent pipe until approx. 10 cm is remaining. Make sure the cables do no follow with it.
|
3. |
Fit the shut-off valve with cables and continue inserting the valve and the rest of the hose.
|
4. |
Spray with Kontakt 61 and plug in the connector.
|
5. |
Fit the top cover.
|
6. |
Fit the quick-release coupling and hose clip.
|
7. |
Fit the vent device, see
.
|