Spark plugs
Spark plugs |
To remove |
1. |
Unplug the 10-pin ignition discharge module connector.
|
2. |
Remove the 4 ignition discharge module screws.
|
3. |
Remove the spark plugs.
|
To fit |
1. |
Coat the spark plug threads with
90 513 210 Universal paste
or equivalent.
|
2. |
Coat the rubber seals with
90 540 018 Lubricant
.
|
3. |
Check the spark gap and fit the spark plugs. Refer to
Spark plugs
.
Tightening torque 28 Nm (21 lbf ft) |
4. |
Fit the 4 ignition discharge module screws.
Tightening torque 11 Nm (8.1 lbf ft) |
5. |
Plug in the 10-pin ignition discharge module connector.
|