P1460

Read the instructions below then start the fault diagnostic procedure.

Symptom: Engine will not start.

P1460

Fault symptoms

•	Engine will not start.

On-Board Diagnostics

Type of diagnosis:

-	Continuous. But interrupted when fault criteria fulfilled and will not restart until next driving cycle.

Enable criteria:

-	Crankshaft rotating.

Fault criteria:

-	Immobilizer code from TWICE incorrect or missing.

Dependents:

-

None.

System reaction to a fault:

-	Fuel shut-off.

OK report:

-	Enable criteria fulfilled. Fault criteria not fulfilled within 60 s.

Fault handling: (See “Fault diagnosis, general” for more information.)

-	Type III. CHECK ENGINE does not go on.

Diagnostic help

Fault diagnosis concerns unprogrammed transponder or unprogrammed immobilizer code in TWICE.

Functions in the diagnostic tool related to the fault:

•	Group FUEL CUT, reading: Trouble Code Detected, unit ON/OFF

See also the description of readings in ”Fault diagnosis, general” for more information.

Note

Program immobilizer code in TWICE after fitting new control module (Trionic T7, TWICE or MIU).