SAAB WIS ONLINE

Trionic 7, Mode 06

Trionic 7, Mode 06

Test ID (Hex) Test limit type and Comp ID (Hex) Description Decimal range Hex range
TID 09

00

Catalyst monitor, evaluated value

0 to 65535

0000 to FFFF

TID 14

00

EVAP monitor, small-leak factor.

0 to 65535

0000 to FFFF



01

EVAP monitor, large-leak factor.

0 to 65535

0000 to FFFF

The same value is reported in CID:s 00 and 01. When a large leak is present, both CID:s will show "Fail".

TID 15

00

EVAP pressure sensor, number of flank shifts with amplitude above limit.

0 to 65535

0000 to FFFF



01

EVAP pressure sensor offset, time for signal out of limits. Value is presented in Milliseconds

0 to 65535 msec

0000 to FFFF

TID 16

00

Brake switch, number of decelerations

0 to 65535

0000 to FFFF



Test limit type and Comp ID description

Parameter name

bit

Description

Component ID

0 - 6

Component ID - manufacturer specified - necessary when multiple components or systems are present on the vehicle and have the same definition of Test ID.

If the same test is performed on more than one component, multiple test results shall be reported for that Test ID. For example, a test for bank 1 catalyst can be the same as a test for a bank 2 catalyst, or a test for a pre-catalyst oxygen sensor can be the same as a test for a post-catalyst oxygen sensor. In either case, a request for a single Test ID would result in two test results being reported with different Component IDs.

Test Limit Type

7

Most significant bit indicates type of test limit, where:

0 - test limit is maximum value - test fails if test value is greater than this value.

1 - test limit is minimum value - test fails if test value is less than this value.