Brake pedal switch
Brake pedal switch |
To remove |
1. |
Remove the pedal bracket's cover by undoing the 3 screws and clip. Bend the cover down and carefully withdraw it. Mind the leads running to the data link connector and the wiring for the lighting.
|
2. |
Carefully turn switch 1 90° clockwise and pull it out of the holder.
|
3. |
Unplug the connector.
|
To fit |
1. |
Spray the connector with Kontakt 61 contact cleaner (part no. 30 21 763).
|
2. |
Carefully pull out the switch's pushrod to its stop position.
|
3. |
Depress the brake pedal and fit the switch.
|
4. |
Carefully release the pedal.
|
5. |
Plug in the connector.
|
6. |
Fit the pedal bracket's cover in reverse order.
|