Manifold absolute pressure sensor

/ 9-5 (9600) / 1999 / 2. Engine / Trionic, 4-cyl / Adjustment/replacement / Manifold absolute pressure sensor

To remove

1.	Remove the engine cover.

2.	Unplug the connector.

3.	Remove the sensor, using a 27 mm socket.

To fit

Fit in reverse order.

Spray the connector with Kontakt 61 contact cleaner (part no. 30 21 763).

Fit a new sealing washer as necessary.

Lubricate the threads with Molykote 1000 (part No. 30 20 271) or the equivalent.

Tightening torque: 17 Nm (12 lbf ft)

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.