SAAB WIS ONLINE

P0100

Read the instructions below then start the fault diagnostic procedure.

Symptom: CHECK ENGINE comes on after two driving cycles. Engine speed drops slower than normal when the accelerator is released. Possible misfiring before DTC is generated.

P0100


Mass Air Flow Circuit. No Signal.


Fault symptoms


CHECK ENGINE comes on after two driving cycles.

Engine speed drops slower than normal when the accelerator is released.

Possible misfiring before DTC is generated.


Conditions

The following conditions apply for this DTC:


Crankshaft rotating and main relay voltage exceeds 10 V.

No frequency for more than 0.5 s.


Diagnostic help

Fault diagnosis concerns electrical faults in connected leads or in the sensor.

Diagnostic tool functions related to this fault are:


Mass air flow sensor reading, in g/s.

Airmass deviation from calculated, in %.


See also the description of readings under Menu "Read Values" for more information.

Check the wiring

Note

Jiggle the leads and in-line connectors at various points and in different directions to detect any intermittent breaks or short circuits in the wiring. Observe the multimeter, test lamp or diagnostic tool while doing this.