P1614
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Cruise control inoperative.
Internal Control Module. Malfunction.
Fault symptoms
|
•
|
Cruise control inoperative.
|
Conditions
The following conditions apply for this DTC:
|
•
|
Ignition ON and processor 339 allows engagement of cruise control.
|
|
•
|
Processor 592 does not allow engagement of cruise control.
|
Diagnostic help
Fault diagnosis concerns an internal fault in the control module.
Check the wiring
|
Note
|
|
Jiggle the leads and in-line connectors at various points and in different directions to detect any intermittent breaks or short circuits in the wiring. Observe the multimeter, test lamp or diagnostic tool while doing this.
|
