SAAB WIS ONLINE

EVAP canister shut-off valve

EVAP canister shut-off valve

To remove


1. Raise the car.


2. Cut the cable tie.

3. Unplug and detach the connector to the vent device.

4. Detach the vent device from the filler pipe bracket with a screwdriver.

5. Clean the vent device.

6. Remove the top cover over the shut-off valve.

7. Detach the connector from the shut-off valve and remove the washer.


8. Move the cover along the hose to access the hose clip.

9. Remove the valve by undoing the valve hose connection.


To fit



1. Connect the valve to the hose.

2. Connect the hose.

3. Refit the washer.

4. Fit the cover over the valve, making sure the cables locate in the washer opening.

Important

Take care with the foam rubber filter so that it is not damaged or incorrectly fitted.


5. Spray with Kontakt 61 and plug in the connector.

6. Fit the front cover.


7. Fit the vent device to the filler pipe.

8. Spray with Kontakt 61 and plug in the connector to the vent device.

9. Secure the cables with a cable tie.

10. Lower the car to the floor.