Relay, limp-home solenoid
|
|
Relay, limp-home solenoid
|
|
1.
|
Remove the pedal bracket's cover by undoing the 3 screws and clip. Bend the cover down and carefully withdraw it. Mind the leads running to the data link connector and the wiring for the lighting.
|
|
2.
|
Remove the screw securing the relay box.
|
|
3.
|
Bend the relay holder downwards.
|
|
4.
|
Carefully bend the relay catch aside and remove the relay.
|
|
1.
|
Spray the contacts in the relay holder with Kontakt 61 (part no. 30 04 520) and fit the relay.
|
|
2.
|
Bend the relay holder upwards to close the cover.
|
|
3.
|
Tighten the screws to the relay box.
|
|
4.
|
Replace the cables to the data link connector and diagnostic tool and the wiring to the lighting. Position the pedal bracket cover and tighten the 3 screws and clip.
|
