SAAB WIS ONLINE

P1908

Read the instructions below then start the fault diagnostic procedure.

Symptom: Some of the following symptoms may perhaps be observed: Additional diagnostic trouble codes in the TCM (P1902 or P1923). Additional diagnostic trouble codes in the Trionic (P1901, P1902 or P1923). Engine fails to start. Cruise Control does not work. A/C not working. Radiator fan runs continuously. Main instrument unit gauges not working.

P1908


No Bus Data From MIU. See Fault Tracing 3:5 Bus and Diagnostic Communication.


Fault symptoms

Some of the following symptoms may perhaps be observed:


Additional diagnostic trouble codes in the TCM (P1902 or P1923).

Additional diagnostic trouble codes in the Trionic (P1901, P1902 or P1923).

Engine fails to start.

Cruise Control does not work.

A/C not working.

Radiator fan runs continuously.

Main instrument unit gauges not working.


Conditions

The following conditions apply for this DTC:


Engine running and no communication for more than 3 seconds.


Diagnostic help

Fault diagnosis concerns intermittent electrical faults in the power supply for the sending control module or in a bus lead.

Check the wiring

Note

Jiggle the leads and in-line connectors at various points and in different directions to detect any intermittent breaks or short circuits in the wiring. Observe the multimeter, test lamp or diagnostic tool while doing this.