Changing the antenna cable between the antenna amplifier “2-channel” (5D)
|
Changing the antenna cable between the antenna amplifier “2-channel” (5D)
|
1.
|
Remove the rear roof cover and unplug the connectors for the lighting.
|
2.
|
Remove the D-pillar trim and the roof covers over the rear side windows.
|
3.
|
Remove the fasteners in the roof trim over the rear side windows and undo the top of both C-pillar trims.
|
4.
|
Remove the two clips in the roof and carefully bend down the headlining.
|
5.
|
Unplug the antenna cable from the antenna amplifier and remove the antenna cable with clips.
|
Important
|
Handle the HF connector (5) with care. Exercise care when undoing the high frequency connector, Fuba GO-NOGO. Disconnection must be performed correctly so as not to damage the connector. See
Antenna amplifier (4D)
|
|
1.
|
Plug the antenna cable into the antenna amplifier and fit the clips in the roof.
|
2.
|
Carefully lift up the headlining and fit the two clips in the roof.
|
3.
|
Refit the C-pillar trims and fasteners over the rear side windows.
|
4.
|
Fit the roof covers over the rear side windows and refit the D-pillar trim.
|
5.
|
Plug in the lighting and fit the rear roof cover.
|
Important
|
Be careful with connector (2). Exercise care when undoing the high frequency connector, Fuba GO-NOGO. Disconnection must be performed correctly so as not to damage the connector. See
Antenna amplifier (4D)
|
|