Panel lighting
| Panel lighting |
| 1. |
Remove the main unit as described on the previous page.
|
|
| 2. |
Remove the four screws in the front panel.
|
|
| 3. |
Undo the six locking tabs which hold the front panel in place.
|
|
| Note | ||
|
When refitting, ensure that the connector under the front panel is correctly positioned. |
| To fit |
Fit the front panel on the main unit and slide in the main unit.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
