SAAB WIS ONLINE

B2770 , B2775 , B2800 , B2802 , B2805 , B2810 , B2815

Read the instructions below then start the fault diagnostic procedure.

Symptom: The following information is shown on SID: B2770: TAPE ERR 01-04 (cassette player) B2775: TAPE ERR 05 (cassette player) B2800: TAPE ERR 02 (cassette player) B2802: TAPE ERR 01 (cassette player) B2805: TAPE ERR 03 (cassette player) B2810: TAPE ERR 11 (cassette player) B2815: TAPE ERR 12 (cassette player)

B2770 , B2775 , B2800 , B2802 , B2805 , B2810 , B2815


B2770: Tape-Player Mecanical fault or faulty cassette

B2775: Tape Head Movement Error.

B2800: Tape Jammed or Mechanical Failure 1

B2802: Tape Broken or Mechanical Failure

B2805: Tape Jammed or Mechanical Failure 2

B2810: Tape Load / Eject Error

B2815: Tape Head Movement Error.


Fault symptoms

The following information is shown on SID:


B2770: TAPE ERR 01-04 (cassette player)

B2775: TAPE ERR 05 (cassette player)

B2800: TAPE ERR 02 (cassette player)

B2802: TAPE ERR 01 (cassette player)

B2805: TAPE ERR 03 (cassette player)

B2810: TAPE ERR 11 (cassette player)

B2815: TAPE ERR 12 (cassette player)


Conditions

B2770

Diagnostic trouble code B2770 is generated if the cassette is broken or jammed, if it does not eject or if there is mechanical failure in the cassette player.

B2775

Diagnostic trouble code B2775 is generated if the main unit detects that the tape speed deviates greatly from the nominal speed. The sound emitted is faulty.

B2800

Diagnostic trouble code B2800 is generated if the cassette is jammed, i.e., if the tape is tangled, or if there is mechanical failure in the cassette player.

B2802

Diagnostic trouble code B2802 is generated if the tape is broken or if there is a mechanical failure in the cassette player.

B2805

Diagnostic trouble code B2805 is generated if the cassette is jammed, i.e., if the tape is tangled, or if there is mechanical failure in the cassette player.

B2810

Diagnostic trouble code B2810 is generated if the cassette does not load or eject.

B2815

Diagnostic trouble code B2815 is generated if the tape head does not move correctly.