No sound on one or both channels of the CD changer. The SID displays CD changer information.
Read the instructions below then start the fault diagnostic procedure.
Symptom: No sound on one of the two channels from the CD changer. Both channels are working for the CD player, radio and cassette player.
| No sound on one or both channels of the CD changer. The SID displays CD changer information. |
Fault symptoms
No sound on one of the two channels from the CD changer. Both channels are working for the CD player, radio and cassette player.Checking the wiring harness
Jiggle the wiring harness at several points and in different directions to check if there are intermittent breaks and short-circuits in the leads. Observe the multimeter, test lamp or diagnostic instrument during the test.This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
