High-level brake light 5D
High-level brake light 5D |
To remove |
1. |
Open the tailgate.
|
2. |
Remove the glass cover plates.
|
3. |
Unscrew the nuts securing the brake light and unplug the connector.
|
4. |
Unscrew the screws and remove the circuit board with LEDs.
|
To fit |
Important | ||
Take care not to damage the guide pins when fitting the circuit board. |
||
1. |
Screw on the circuit board.
|
2. |
Fit the brake light and tighten the nuts alternately.
|
3. |
Fit the glass cover plates.
|