Electronic unit
Electronic unit |
1. |
Remove the main instrument unit, see
.
|
2. |
Undo the eight screws securing the covers over the back section. Note the locations of the four long screws and the four short screws.
|
3. |
Release the retainer (two clips) for the back section cover and remove the cover.
|
4. |
Unplug the connector and the three contact foils.
|
5. |
Remove the electronic unit.
|
To fit |
1. |
Fit the electronic unit.
|
2. |
Plug in the foils and the connector
|
3. |
Fit the electronic unit.
|
4. |
Fit the cover over the electronic unit, eight screws.
|
5. |
Fit the main instrument unit, see
.
|