Airbag lamp
Read the instructions below then start the fault diagnostic procedure.
Symptom: Airbag lamp not working.
| Airbag lamp |
Fault symptoms
Airbag lamp not working.Diagnostic help
The airbag lamp can be turned on and off using the activation command in the diagnostic tool from the airbag control module.Checking the wiring harness
Jiggle the wiring harness at several points and in different directions to detect intermittent breaks and short-circuits in the leads. Observe the multimeter, test lamp or diagnostic tool during the test.This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
