Function
|
Alternative
|
Description
|
Market
|
Anti Theft
|
|
|
|
Anti Theft Installation
|
Without alarm
Glass breakage
Grass breakage and Tilt sensor
|
For after market fitting or changing of the anti-theft alarm, this must be programmed.
|
|
Soundlevel at arm/disarm
|
Low/High
|
The sound level of the siren can be selected LOW/HIGH when arming /disarming the alarm. This function does not affect the sound level of the siren when the alarm is activated.
|
|
Number of beeps at arming
|
0-7 beeps
|
The number of times the siren will beep when the alarm is armed.
|
|
Number of beeps at disarming
|
0-7 beeps
|
The number of times the siren will beep when the alarm is disarmed.
|
|
Number of beeps when opening trunk
|
0-7 beeps
|
The number of times the siren is to sound when opening the boot lid/tailgate.
|
|
Disarming at low battery voltage
|
No
YES
|
When this function is programmed to “Yes”, the alarm will be disarmed when the voltage falls below 7 Volts.
|
|
Sound Activation Time
|
0-520 s
|
The time during which the siren sounds when the alarm is tripped.
|
|
Flashers Activation Time
|
0-520 s
|
The time during which the direction indicators flash when the alarm is tripped.
|
|
Self Arming
|
No
YES
|
When this is activated “Yes” the car will self-arm after the self-arming time has elapsed.
|
|
Selfarming Time
|
0-2040 s
|
Time before the car self-arms.
|
|
|
|
|
|
Central Locking
|
|
|
|
TSL By 2 Times at Remote Control
|
No
YES
|
Anti-theft security mode by pressing the lock button on the remote control two times in succession within 5 seconds. This function must not be programmed to “Yes” for the US market.
|
|
TSL Locking with key
|
No
YES
|
Anti-theft security mode by turning the key to the locked position two times in succession within 5 seconds.
|
|
Belt Warning Sound
|
On
Off
|
This function is programmed “Yes” on certain markets.
|
|
Transport Mode
|
On
Off
|
When this is programmed to “Yes”, the central locking and anti-theft security systems do not work. This reduces the rest state current consumption of the TWICE control module.
|
|
Steering Wheel Position
|
LHD
Right Hand Side
|
Information for pictogram display on the main instrument unit. MIU requires this information so that the pictogram indicates the correct side when the driver's door is opened.
|
TWICE sends the information on the bus and is read by MIU.
|
