SAAB WIS ONLINE

Transmission fluid temperature sensor

Transmission fluid temperature sensor

To remove



1. Remove the battery cover, battery and battery tray.

2. Disconnect the temperature sensor's cable.


3. Raise the car.

4. Remove the two bolts securing the cover.

Note

Place an oil pan under the transmission to collect the fluid that runs out.


5. Unscrew the fluid temperature sensor.


Fitting



1. Screw the fluid temperature sensor in place.

Tightening torque: 25 Nm (18.5 lbf ft)

2. Refit the cover and tighten the bolts.

Tightening torque: 25 Nm (18.5 lbf ft)

3. Lower the car to the floor.

4. Reconnect the fluid temperature sensor's cable.

Secure the cable in the clip on the transmission.

5. Refit the battery tray, battery and battery cover.


6. Fill with transmission fluid, Texaco Texamatic DEXRON III (7045 EU, TL1863 US), to the correct level.

7. Set the right time on the clock.