Ignition switch cylinder
Ignition switch cylinder |
1. |
Remove the key detector. Rotate the antenna unit clockwise slightly and lift it up.
|
2. |
Set the ignition key in the OFF position.
|
3. |
Bend in a welding rod.
|
4. |
Press in the catch in the lock cylinder using the welding rod and pull the lock cylinder straight up. The key must remain in the rock cylinder.
|
Fitting |
1. |
Set the ignition key in the OFF position.
|
2. |
Align the lock cylinder. Press it down firmly and feel to ensure that it is fitted securely.
|
3. |
Fit the key detector.
|