SAAB WIS ONLINE

Brake caliper, front

Brake caliper, front

To remove



1. Raise the car and remove the wheel.

2. Press in the brake piston with a pair of slip-joint pliers.

3. Depress the brake pedal slightly, using a brake pedal clamp.


4. Remove fuse number 1.

5. Detach the brake hose from the brake caliper. Plug the hose and the caliper.


6. Remove the two brake caliper retaining bolts and lift off the caliper.


To fit



1. Put the brake caliper in place. Secure the threads on the two retaining bolts with Loctite 242 and tighten them to torque.

Tightening torque 117 Nm (86 lbf ft)

2. Fit the brake hose to the brake caliper and tighten to torque.

Tightening torque 40 Nm (29 lbf ft)

Important

Make sure not to twist the hose while fitting.


3. Remove the brake pedal clamp and put back the fuse.

Bleed the brake system, see

4. Fit the wheel, see Wheels .

Tightening torques

aluminium wheel 110 Nm (81 lbf ft)

steel wheel 50 Nm +2x90°, max. 110 Nm (37 lbf ft +2x90°, max. 81 lbf ft)

5. Lower the car and depress the brake pedal to press out the brake pistons. Check the brake fluid level and top up as necessary.