Brake servo, LHD
Brake servo, LHD |
1. |
Remove the master cylinder, see
.
|
2. |
Clean the area round the connections using compressed air. Remove the master cylinder's rear brake line from the ABS unit and plug the holes.
|
3. |
Disconnect the vacuum hose from the brake servo.
|
4. |
Remove the brake servo retaining nuts from the bracket.
|
5. |
Remove the clip on the pushrod and lift out the brake servo unit.
|
To fit |
1. |
Connect the pedal and brake servo pushrods together.
|
2. |
Position the brake servo on the bracket and tighten the four retaining nuts.
|
3. |
Depress the brake pedal to lock the clip.
|
4. |
Connect the vacuum hose to the brake servo.
|
5. |
Fit the master cylinder, see
.
|
6. |
Fit the master cylinder's rear brake line.
|