ABS warning lamp does not come on

Read the instructions below then start the fault diagnostic procedure.

Symptom: Lamp test is conducted when the ignition is turned on. ABS warning lamp should light for about 3 seconds. ABS warning lamp does not come on.

ABS warning lamp does not come on

Fault symptoms

Lamp test is conducted when the ignition is turned on. ABS warning lamp should light for about 3 seconds. ABS warning lamp does not come on.

Conditions

Fault in the circuit between TC/ABS control module pin 21 and the warning lamp in the main instrument unit.

Diagnostic help

The ABS warning lamp can be activated with the diagnostic tool.

-	Select “Activate”

-	Select “ABS lamp”