TCS lamp does not come on

Read the instructions below then start the fault diagnostic procedure.

Symptom: Lamp test is conducted when ignition turned on. TCS indicator lamp should be on for about 3 seconds. TCS indicator lamp does not come on.

TCS lamp does not come on

Fault symptoms

Lamp test is conducted when ignition turned on. TCS indicator lamp should be on for about 3 seconds. TCS indicator lamp does not come on.

Conditions

Fault in the circuit between TC/ABS control module pin 28 and main instrument unit pin 13 (K20).

Diagnostic help

The TCS lamp can be activated with the diagnostic tool.

-	Select “Activate”

-	Select “TCS Lamp”