SAAB WIS ONLINE

Steering wheel

Steering wheel

To remove

Warning

Read the safety and handling instructions for the Airbag (SRS) before starting work.


See Safety and handling directions .

Important

Make sure the wheels are pointing straight ahead before starting removal.



1. Put the ignition in OFF position.

2. Remove the airbag from the steering wheel, 2 plugs and screws.


3. Lift out the airbag and unplug the connector.

Important

The steering wheel often comes loose suddenly from the cone and there is a risk that the contact roller and leads can fasten to the steering wheel and be damaged.


4. Undo the steering wheel centre nut to the last few threads and pull off the steering wheel to that position.

Warning

Never use the steering column adjustment to knock loose the steering wheel, as this will damage the impact joint.


5. Remove the nut and carefully lift off the steering wheel.


To fit


1. Make sure the wheels are pointing straight ahead.

2. Put in place the steering wheel.

3. Fit the steering wheel centre nut and tighten it.

Tightening torque: 38 Nm (28 lbf ft).


4. Plug in the connectors and fit the airbag module in the steering wheel with two screws and plugs.