Driver airbag
| Driver airbag |
The driver's airbag is mounted in the steering wheel. It is connected to pins 1 and 2 of the control module.
A gas generator and airbag are fitted on the driver's side of the car. The gas generator is riveted and screwed to a metal bracket. The airbag is protected by a plastic cover with fracture lines that is mounted on the metal bracket. The airbag has a volume of about 60 litres.
The steering wheel centre pad (airbag module) is supplied with test and detonation current from a coil spring (contact roller), which also supplies the SID with information from the steering wheel buttons.
| Driver airbag gas generator |
The gas generator consists of a light alloy housing, electric detonator, explosive charge and filter.
On receiving an activation command, the control module sends a current pulse to the detonator which ignites the explosive charge. On combustion, this explosive charge generates a gas. The filter cools the gas and removes particles from it before it passes into the airbag.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
