SAAB WIS ONLINE

Mixed-air temperature sensor, RH

Mixed-air temperature sensor, RH

To remove



1. Remove the glove compartment, see group 8, Interior equipment ā€¯Adjustment and replacementā€¯ .

Remove the trim from the side of the centre console.

2. Pull out the sensor from the air duct running to the lower panel.


3. Remove the radio unit and control panel for MCC/ACC.


4. Unplug the lower connector (grey) from the climate housing.


Withdraw the pins in question from the connector.

5. Pull out the sensor.

Note

The leads in question are taped on to a wiring harness. Removal can be facilitated by cutting off the leads in question at a suitable place and by using new leads when refitting.



To fit

Fit in reverse order.

Note

New leads must be routed when refitting. Fasten the new leads to the original wiring harness.