Stepping motor, air-mixing RH
|
|
Stepping motor, air-mixing RH
|
Put the air-mixing control to max cold or max heat before commencing removal.
|
1.
|
Remove the glove compartment, see group 8, Interior equipment
, ”Adjustment and replacement”.
Remove the trim from the side of the centre console.
|
|
2.
|
Remove the stepping motor, 2 bolts.
|
When fitting, the lower flap must be put in the same end position as the upper flap.
Fit in reverse order.
|
Note
|
|
When fitting the stepping motor, grasp the air-blending flap via the floor air duct to prevent the flap jumping out of its mounting.
|
