SAAB WIS ONLINE

Nut piece, rear subframe

Nut piece, rear subframe

Removing



1. Remove the mats to expose the floor.

2. Use a 35 mm hole saw to cut out a hole in the marking.

3. If necessary, remove the bolt from underneath.

4. Use a screwdriver to snap the old nut piece out of the holder. Use a pair of pliers or a piece of bent wire to lift out the nut piece.


Fitting



1. Fit a new nut piece without plastic holder.

2. Fit the bolt from underneath.

3. Apply anti-corrosion agent to the edge and fit a plug, part no. 43 33 498.

4. Remove all swarf, grinding dust and the like from the floor, using a vacuum cleaner.