Bonnet, adjustment
| Bonnet, adjustment |
| 1. |
Slightly loosen the three nuts and adjust the bonnet backwards or forwards.
|
|
| 2. |
Tighten the nuts.
|
|
| 3. |
Check the position of the locking pins and adjust them if necessary. See below under “Adjusting the locking pins".
|
|
| Adjusting the rear height of the bonnet |
| 1. |
Slightly loosen the three screws and adjust the rear height of the bonnet.
|
|
| 2. |
Tighten the screws.
|
|
| Adjusting the front height of the bonnet |
| 1. |
Undo the locking pins nuts.
|
|
| 2. |
Adjust the position of the locking pins with a screwdriver.
|
|
| 3. |
Adjust the rubber buffers correspondingly.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
