Boot lid lock, 4D
Boot lid lock, 4D |
1. |
Remove the trim from the inside of the boot lid.
|
2. |
Undo the three screws holding the lock.
|
3. |
Turn the clip securing the locking rod for the lock motor driver and detach the locking rod.
|
4. |
Remove the locking rod and the lock.
|
5. |
Transfer the locking rod to the new lock.
|
To fit |
1. |
Position the lock and locking rod.
|
2. |
Fit the clip securing the locking rod for the lock motor driver.
|
3. |
Screw on the lock.
|
4. |
Fit the trim on the inside of the boot lid.
|