SAAB WIS ONLINE

Inner tailgate handle, 5D

Inner tailgate handle, 5D

To remove



1. Open the tailgate.

2. Remove the frame around the inner door handle by prising with a screwdriver in the three recesses. Once the frame clips have been released, pull the frame down and bend it out.

3. Remove the inner tailgate trim by removing the door pull retaining screws and the plastic clips in the trim.

4. Lift off the tailgate trim as described below:


4.a. Pull down the top of the trim to release it from the clips.

4.b. Pull back on the trim to release the guide pin at the door pull, taking care not to break it.

5. Remove the two lock rods.


6. Remove the screws.

7. Slide the handle to the side and tilt down the top. Remove the handle.


To fit



1. Hook the catch onto the metal and slide the handle in place. Screw on the handle.

2. Fit the lock rods.

3. Fit the inner trim by inserting the guide pin at the door pull and fastening with the clips at the edge of the window. Screw in the two door pull screws. Fasten the remaining clips around the trim.


4. Fit the frame around the inner door handle.

5. Check the function.