SAAB WIS ONLINE

Rear door lock unit

Rear door lock unit

To remove



1. Remove the door trim.

2. Remove the water separator using 82 93 474 Removal tool .

3. Remove the three screws holding the lock unit.

4. Detach the wire to the interior door handle.

5. Pull down the lock unit slightly to detach the pushrod.


6. Lift out the lock unit and unplug the connector.

7. Detach the wires for the door handle and locking rod from the lock unit.


To fit



1. Attach the wire for the door handle and the locking rod to the lock unit

2. Plug in the connector.

3. Fit the lock unit in place and guide the pushrod between the outer door handle and the lock unit.

4. Attach the wire for the interior door handle.

5. Screw on the lock unit.


6. Refit the water separator, door trim and cover around the window frame.