Tailgate hinges, 5D
Tailgate hinges, 5D |
1. |
Remove the tailgate. See
.
|
2. |
Remove the gas spring from the hinge.
|
3. |
Remove the bolt securing the hinge on the inside.
|
4. |
Remove the side supports.
|
5. |
Pull off the weatherstrip sufficiently to reveal the mouldings.
|
6. |
Some cars
: Remove the side covers.
|
7. |
Some cars
: Remove the upper cover.
|
8. |
Unscrew the two bolts on the outside of the body.
|
9. |
Lift out the hinge.
|
To fit |
1. |
Put the hinge in position.
|
2. |
Screw on the two bolts on the outside of the body.
|
3. |
Screw in the bolt on the inside.
Tightening torque: 20 Nm (14 lbf ft) |
4. |
Lubricate the gas spring ball sockets with Gleitmo 805 (part no. 30 06 442) and fit the gas spring.
|
5. |
Fit the tailgate, refer to
.
|
6. |
Adjust the tailgate, refer to
.
|
7. |
Certain car
: Fit the covers around the tailgate opening.
|