SAAB WIS ONLINE

Replacement of rear cellular block, 4D

Replacement of rear cellular block, 4D

To remove



1. Remove the bumper and lay it on a well-protected workbench.

2. Loosen the upper cellular block from the protective shell. Lift it out from the bumper rail (it is wedged into the bumper rail).

3. Remove the two cellular blocks that sit on each side of the protective shell. Loosen the bumper rail from the 14 clips securing it to the protective shell.


4. Loosen the cellular block from the protective shell (wedged into the protective shell's retaining wedges).



To fit



1. Fit the two cellular blocks on the sides of the protective shell.

2. Press the cellular block into the protective shell's retaining wedges.

3. Fit the bumper rail.


Note

The rail should be guided in place with a locating stud in the protective shell.


4. Fit the upper cellular block.


5. Refit the bumper to the car.