Weatherstrip, 5D luggage compartment opening
| Weatherstrip, 5D luggage compartment opening |
| 1. |
Pull the moulding away from the body.
|
|
| To fit |
| 1. |
Start by fitting the lower part of the moulding. Make sure that it is properly centred.
|
|
| 2. |
Press the moulding into place all round the opening.
|
|
| 3. |
Check that the moulding's lower flange is on the inside of the bumper shell against the sheet metal.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
