(98-12-843) Door mirror casing comes loose
TECHNICAL NEWS
|
Bulletin Nbr:
|
98-12-843
|
Date:
...........
|
DECEMBER 1998
|
Market:
|
ALL
|
|
Door mirror casing comes loose
|
Saab 9-5 up to and including VIN W3077258 (M98) and X3001490 (M99) respectively
Door mirror casing comes loose.
79 75 535 Screw
1.
|
Remove the mirror glass.
|
2.
|
Make sure the glass was not damaged during removal.
|
3.
|
Open the three clips just enough to fit the screws (part no. 79 75 535), which will reinforce the casing mounting. See illustration.
|
4.
|
Make sure there are no depressions in the mirror casing. If this is the case, loosen the screws 1-2 turns.
|
5.
|
Make sure the rubber bellows for the mirror motor are in place.
|
6.
|
Fit the glass with the motor in its centre position. The glass must not be loose. Make sure the glass is located correctly.
|
7.
|
Check that the glass can be adjusted to all end positions.
|