Roof console, 4D
Roof console, 4D |
To remove |
|
1. |
Remove the sun visors and their mountings (A).
|
2. |
Remove the light lens (B) from the cover by carefully prizing with a screwdriver in the clip recess of the light lens.
|
3. |
Unscrew the roof console's cover (C).
|
4. |
Unplug any connectors for microphone and interior temperature sensor and lift away the cover (B). Unplug and separate the grey 10-pin connector.
|
5. |
Remove the interior rearview mirror, 3 screws.
|
6. |
Remove the A-pillar trims (fastened with clips) (D).
|
7. |
Remove all courtesy handles above the doors (E).
|
8. |
Cars with sunroof:
Undo the clips (A) in the rear edge of the sunroof (x 3) by carefully pressing with a finger from the rear.
|
9. |
Undo the B-pillar trims (A), fastened with clips. Lift the trims from the air ducts and place them to one side.
|
10. |
Fold down the rear seat backrest cushions. Remove the speaker grilles on both sides.
|
11. |
Remove the C-pillar trims (A) at the top edge (fastened with clips). Allow them to remain hanging in the belts.
|
12. |
Remove the cover (B) for the brake light (fastened with clips) and unplug the connector. Move out the brake light's cable so that it is routed free from the console.
|
13. |
Undo the clips (C) securing the rear of the headlining (x 2) by turning them 90° and pulling them down.
|
14. |
Lower and slide forward the front seats and fold the backrests forward as far as possible.
|
15. |
Carefully release the headlining from the door weatherstrips (D). First undo the passenger side and then the driver's side.
|
16. |
Cars with sunroof:
Detach the headlining from the hooks adjacent to the sunroof.
|
17. |
Unplug and separate the connector on the upper surface of the headlining.
|
18. |
Cars with anti-theft alarm:
Unplug and separate the connector.
|
19. |
Move the headlining backwards and lower it.
|
20. |
Remove the roof console (A).
|
21. |
Unplug and separate the connector (B) and unplug the connector for the sunroof (C) if fitted.
|
To fit |
|
1. |
Plug in the connector (B) and also (C) if such a connector is fitted.
|
2. |
Fit the roof console (A).
|
3. |
Cars with anti-theft alarm:
Plug in the connector.
|
4. |
Plug in the connector on the upper surface of the headlining.
|
5. |
Fit the headlining to the B-pillar trim and door weatherstrips on the driver's side.
|
6. |
Move the headlining forward so it is hanging from the roof console by the rearview mirror.
|
7. |
Cars with sunroof:
Secure the headlining in the hooks adjacent to the sunroof.
|
8. |
Align the headlining under the door weatherstrips (D) on the passenger side. Check that the door weatherstrips are fitted correctly.
|
9. |
Route in the brake light cable and plug in the connector.
|
10. |
Fit the clips (C) which hold the headlining at the rear edge.
|
11. |
Fit the brake light cover (B).
|
12. |
Fit the C-pillar trims (A).
|
13. |
Fit the speaker grilles and fold back the rear seat backrest cushions.
|
14. |
Fit the B-pillar trims (A). Check that the belt runs correctly.
|
15. |
Cars with sunroof:
Fit the clips (A) in the rear edge of the sunroof.
|
16. |
Fit the courtesy handles (E).
|
17. |
Fit the A-pillar trims (D).
|
18. |
Fit the interior rearview mirror.
|
19. |
Plug in any connectors for microphone, interior temperature sensor and the grey 10-pin connector.
|
20. |
Fit the roof console's cover and light lens (C).
|
21. |
Fit the sun visors and their mountings (A).
|