Roof covering luggage compartment, 5D
| Roof covering luggage compartment, 5D |
| 1. |
Pull away the rear roof covering, fastened with clips.
|
|
| 2. |
Unplug the luggage compartment light connector and lower the roof covering.
|
|
| 3. |
Remove the light by inserting a screwdriver in the recesses and prising it off.
|
|
| To fit |
| 1. |
Fit the lighting.
|
|
| 2. |
Plug in the luggage compartment light connector and press the roof covering into place.
Check the fit of the weatherstrip over the edge of the roof covering. |
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
