SAAB WIS ONLINE

Drive belt for auxiliaries

Drive belt for auxiliaries

To remove


1. Drape wing protectors over the wings and raise the car.

2. Remove the lower spoiler sections.


3. Insert two 83 95 238 Wedges , between the oil sump and subframe and between the gearbox and subframe.


4. Lower the car.

5. Remove the mass air flow sensor with hose.


6. Detach the power steering hose from the holder.

7. Remove the right-hand engine attachment with bracket and engine mount.

8. Release the multigroove belt from tension.



To fit


1. Fit the multigroove belt.

2. Fit the right-hand engine mounting with bracket and engine pad.

Tightening torque: To body 63 Nm (46.5 lbf ft)

3. Fit the power steering hose to the holder.

4. Fit the mass air flow sensor with hose.

5. Raise the car.

6. Lower the engine by carefully removing the wedges.

7. Fit the lower spoiler sections.

8. Lower the car and remove the wing protectors.